Stainless Steel Clamping System Tools

Whether you are using banding with buckles, strapping with wing-seals, or a combination thereof, the stainless steel clamping system is applied using purpose manufactured clamping tools. Most of these tools are unique to the stainless steel clamping systems and allows for the installation of strong, durable stainless steel clamps that will remain intact for years to come.

The standard clamping tool features a built-in strapping cutter that makes easy work out of the stainless steel clamp installation. Although many other versions of this tool, and also other methods for stainless steel clamping system applications are out there, this tool has been around for more than 50 years and is still considered to be a favorite for installing and forming stainless steel clamps.

Standard Tool for Stainless Steel Clamping System

Part#: T-001

Standard Stainless Steel Clamping System Tool with a draw strength of 2,400 lbs. to be used with 3/4" banding or strapping (0.030" max.) or smaller sizes.

Extra heavy duty Tool for EHD Stainless Steel Clamping System

.

Part#: G-001

Extra heavy duty stainless steel clamping system tool to use with 0.044" thick stainless steel banding and matching EHD buckles

Ratchet tensioner tool for Stainless Steel Clamping Systems

Part#: T-101

The Ratchet tensioner tool is a great substitute for the standard stainless steel clamping system tool and can be used with 3/4" banding or strapping (0.030" max.) or smaller sizes.

Wide-Mouth Ratchet tool for black-coated Stainless Steel Banding

Part#: T-102

Wide-mouth ratchet tensioner tool to use for the application of black-coated stainless steel banding. This tool can be used with any of the black-coated stainless steel banding sized distributed by Straptite USA, Inc.

Insulation tensioner for lighter-duty Stainless Steel Clamping System applications

Part#: T-201

This light duty insulation tensioner is typically used with stainless steel strapping and is best known for the installation of insulation.

Short-handle Stainless Steel Banding Cutter

Part#: S-001

Short-handle stainless steel banding cutter to use with stainless steel banding (max. 0.030" thick) and stainless steel strapping

Heavy-duty Stainless Steel Banding Cutter

Part#: S-002

Heavy-duty stainless steel banding cutter for use with the extra heavy duty banding (0.044" thick) supplied by Straptite USA, Inc.